Summary: This article discusses an ongoing social engineering campaign targeting multiple managed detection and response (MDR) customers, where a threat actor overwhelms a user’s email with junk and offers assistance through remote connection software to harvest credentials and maintain persistence on the victim’s asset.
Threat Actor: Unknown | Unknown
Victim: Multiple managed detection and response (MDR) customers | Multiple managed detection and response (MDR) customers
Key Point :
- A social engineering campaign is targeting MDR customers by overwhelming their email with junk and offering remote assistance.
- The threat actor prompts users to download remote monitoring and management software to establish a remote connection.
- Once connected, the threat actor downloads payloads to harvest credentials and maintain persistence on the victim’s asset.
- In one incident, Cobalt Strike beacons were deployed to other assets within the compromised network.
- Ransomware attacks have also been observed in some cases.
Last updated at Fri, 10 May 2024 17:55:27 GMT
Co-authored by Rapid7 analysts Tyler McGraw, Thomas Elkins, and Evan McCann
Executive Summary
Rapid7 has identified an ongoing social engineering campaign that has been targeting multiple managed detection and response (MDR) customers. The incident involves a threat actor overwhelming a user’s email with junk and calling the user, offering assistance. The threat actor prompts impacted users to download remote monitoring and management software like AnyDesk or utilize Microsoft’s built-in Quick Assist feature in order to establish a remote connection. Once a remote connection has been established, the threat actor moves to download payloads from their infrastructure in order to harvest the impacted users credentials and maintain persistence on the impacted users asset.
In one incident, Rapid7 observed the threat actor deploying Cobalt Strike beacons to other assets within the compromised network. While ransomware deployment was not observed in any of the cases Rapid7 responded to, the indicators of compromise we observed were previously linked with the Black Basta ransomware operators based on OSINT and other incident response engagements handled by Rapid7.
Overview
Since late April 2024, Rapid7 identified multiple cases of a novel social engineering campaign. The attacks begin with a group of users in the target environment receiving a large volume of spam emails. In all observed cases, the spam was significant enough to overwhelm the email protection solutions in place and arrived in the user’s inbox. Rapid7 determined many of the emails themselves were not malicious, but rather consisted of newsletter sign-up confirmation emails from numerous legitimate organizations across the world.
With the emails sent, and the impacted users struggling to handle the volume of the spam, the threat actor then began to cycle through calling impacted users posing as a member of their organization’s IT team reaching out to offer support for their email issues. For each user they called, the threat actor attempted to socially engineer the user into providing remote access to their computer through the use of legitimate remote monitoring and management solutions. In all observed cases, Rapid7 determined initial access was facilitated by either the download and execution of the commonly abused RMM solution AnyDesk, or the built-in Windows remote support utility Quick Assist.
In the event the threat actor’s social engineering attempts were unsuccessful in getting a user to provide remote access, Rapid7 observed they immediately moved on to another user who had been targeted with their mass spam emails.
Once the threat actor successfully gains access to a user’s computer, they begin executing a series of batch scripts, presented to the user as updates, likely in an attempt to appear more legitimate and evade suspicion. The first batch script executed by the threat actor typically verifies connectivity to their command and control (C2) server and then downloads a zip archive containing a legitimate copy of OpenSSH for Windows (ultimately renamed to ***RuntimeBroker.exe***), along with its dependencies, several RSA keys, and other Secure Shell (SSH) configuration files. SSH is a protocol used to securely send commands to remote computers over the internet. While there are hard-coded C2 servers in many of the batch scripts, some are written so the C2 server and listening port can be specified on the command line as an override.
The script then establishes persistence via run key entries in the Windows registry. The run keys created by the batch script point to additional batch scripts that are created at run time. Each batch script pointed to by the run keys executes SSH via PowerShell in an infinite loop to attempt to establish a reverse shell connection to the specified C2 server using the downloaded RSA private key. Rapid7 observed several different variations of the batch scripts used by the threat actor, some of which also conditionally establish persistence using other remote monitoring and management solutions, including NetSupport and ScreenConnect.
In all observed cases, Rapid7 has identified the usage of a batch script to harvest the victim’s credentials from the command line using PowerShell. The credentials are gathered under the false context of the “update” requiring the user to log in. In most of the observed batch script variations, the credentials are immediately exfiltrated to the threat actor’s server via a Secure Copy command (SCP). In at least one other observed script variant, credentials are saved to an archive and must be manually retrieved.
In one observed case, once the initial compromise was completed, the threat actor then attempted to move laterally throughout the environment via SMB using Impacket, and ultimately failed to deploy Cobalt Strike despite several attempts. While Rapid7 did not observe successful data exfiltration or ransomware deployment in any of our investigations, the indicators of compromise found via forensic analysis conducted by Rapid7 are consistent with the Black Basta ransomware group based on internal and open source intelligence.
Forensic Analysis
In one incident, Rapid7 observed the threat actor attempting to deploy additional remote monitoring and management tools including ScreenConnect and the NetSupport remote access trojan (RAT). Rapid7 acquired the Client32.ini file, which holds the configuration data for the NetSupport RAT, including domains for the connection. Rapid7 observed the NetSupport RAT attempt communication with the following domains:
- rewilivak13[.]com
- greekpool[.]com
After successfully gaining access to the compromised asset, Rapid7 observed the threat actor attempting to deploy Cobalt Strike beacons, disguised as a legitimate Dynamic Link Library (DLL) named 7z.DLL, to other assets within the same network as the compromised asset using the Impacket toolset.
In our analysis of 7z.DLL, Rapid7 observed the DLL was altered to include a function whose purpose was to XOR-decrypt the Cobalt Strike beacon using a hard-coded key and then execute the beacon.
The threat actor would attempt to deploy the Cobalt Strike beacon by executing the legitimate binary 7zG.exe and passing a command line argument of `b`, i.e. `C:UsersPublic7zG.exe b`. By doing so, the legitimate binary 7zG.exe side-loads 7z.DLL, which in turn executes the embedded Cobalt Strike beacon. This technique is known as DLL side-loading, a method Rapid7 previously discussed in a blog post on the IDAT Loader.
Upon successful execution, Rapid7 observed the beacon inject a newly created process, choice.exe.
Mitigations
Rapid7 recommends baselining your environment for all installed remote monitoring and management solutions and utilizing application allowlisting solutions, such as AppLocker or Microsoft Defender Application Control, to block all unapproved RMM solutions from executing within the environment. For example, the Quick Assist tool, quickassist.exe, can be blocked from execution via AppLocker. As an additional precaution, Rapid7 recommends blocking domains associated with all unapproved RMM solutions. A public GitHub repo containing a catalog of RMM solutions, their binary names, and associated domains can be found here.
Rapid7 recommends ensuring users are aware of established IT channels and communication methods to identify and prevent common social engineering attacks. We also recommend ensuring users are empowered to report suspicious phone calls and texts purporting to be from internal IT staff.
MITRE ATT&CK Techniques
| Tactic | Technique | Procedure |
|---|---|---|
| Denial of Service | T1498: Network Denial of Service | The threat actor overwhelms email protection solutions with spam. |
| Initial Access | T1566.004: Phishing: Spearphishing Voice | The threat actor calls impacted users and pretends to be a member of their organization’s IT team to gain remote access. |
| Execution | T1059.003: Command and Scripting Interpreter: Windows Command Shell | The threat actor executes batch script after establishing remote access to a user’s asset. |
| Execution | T1059.001: Command and Scripting Interpreter: PowerShell | Batch scripts used by the threat actor execute certain commands via PowerShell. |
| Persistence | T1547.001: Boot or Logon Autostart Execution: Registry Run Keys / Startup Folder | The threat actor creates a run key to execute a batch script via PowerShell, which then attempts to establish a reverse tunnel via SSH. |
| Defense Evasion | T1222.001: File and Directory Permissions Modification: Windows File and Directory Permissions Modification | The threat actor uses cacls.exe via batch script to modify file permissions. |
| Defense Evasion | T1140: Deobfuscate/Decode Files or Information | The threat actor encrypted several zip archive payloads with the password “qaz123”. |
| Credential Access | T1056.001: Input Capture: Keylogging | The threat actor runs a batch script that records the user’s password via command line input. |
| Discovery | T1033: System Owner/User Discovery | The threat actor uses whoami.exe to evaluate if the impacted user is an administrator or not. |
| Lateral Movement | T1570: Lateral Tool Transfer | Impacket was used to move payloads between compromised systems. |
| Command and Control | T1572: Protocol Tunneling | An SSH reverse tunnel is used to provide the threat actor with persistent remote access. |
Rapid7 Customers
InsightIDR and Managed Detection and Response customers have existing detection coverage through Rapid7’s expansive library of detection rules. Rapid7 recommends installing the Insight Agent on all applicable hosts to ensure visibility into suspicious processes and proper detection coverage. Below is a non-exhaustive list of detections that are deployed and will alert on behavior related to this malware campaign:
| Detections |
|---|
| Attacker Technique – Renamed SSH For Windows |
| Persistence – Run Key Added by Reg.exe |
| Suspicious Process – Non Approved Application |
| Suspicious Process – 7zip Executed From Users Directory (*InsightIDR product only customers should evaluate and determine if they would like to activate this detection within the InsightIDR detection library; this detection is currently active for MDR/MTC customers) |
| Attacker Technique – Enumerating Domain Or Enterprise Admins With Net Command |
| Network Discovery – Domain Controllers via Net.exe |
Indicators of Compromise
Network Based Indicators (NBIs)
| Domain/IPv4 Address | Notes |
|---|---|
| upd7[.]com | Batch script and remote access tool host. |
| upd7a[.]com | Batch script and remote access tool host. |
| 195.123.233[.]55 | C2 server contained within batch scripts. |
| 38.180.142[.]249 | C2 server contained within batch scripts. |
| 5.161.245[.]155 | C2 server contained within batch scripts. |
| 20.115.96[.]90 | C2 server contained within batch scripts. |
| 91.90.195[.]52 | C2 server contained within batch scripts. |
| 195.123.233[.]42 | C2 server contained within batch scripts. |
| 15.235.218[.]150 | AnyDesk server used by the threat actor. |
| greekpool[.]com | Primary NetSupport RAT gateway. |
| rewilivak13[.]com | Secondary NetSupport RAT gateway. |
| 77.246.101[.]135 | C2 address used to connect via AnyDesk. |
| limitedtoday[.]com | Cobalt Strike C2 domain. |
| thetrailbig[.]net | Cobalt Strike C2 domain. |
Host-based indicators (HBIs)
| File | SHA256 | Notes |
|---|---|---|
| s.zip | C18E7709866F8B1A271A54407973152BE1036AD3B57423101D7C3DA98664D108 | Payload containing SSH config files used by the threat actor. |
| id_rsa | 59F1C5FE47C1733B84360A72E419A07315FBAE895DD23C1E32F1392E67313859 | Private RSA key that is downloaded to impacted assets. |
| id_rsa_client | 2EC12F4EE375087C921BE72F3BD87E6E12A2394E8E747998676754C9E3E9798E | Private RSA key that is downloaded to impacted assets. |
| authorized_keys | 35456F84BC88854F16E316290104D71A1F350E84B479EEBD6FBB2F77D36BCA8A | Authorized key downloaded to impacted assets by the threat actor. |
| RuntimeBroker.exe | 6F31CF7A11189C683D8455180B4EE6A60781D2E3F3AADF3ECC86F578D480CFA9 | Renamed copy of the legitimate OpenSSH for Windows utility. |
| a.zip | A47718693DC12F061692212A354AFBA8CA61590D8C25511C50CFECF73534C750 | Payload that contains a batch script and the legitimate ScreenConnect setup executable. |
| a3.zip | 76F959205D0A0C40F3200E174DB6BB030A1FDE39B0A190B6188D9C10A0CA07C8 | Contains a credential harvesting batch script. |
“An interesting youtube video that may be related to the article above”